Free returns in the standard window Flat-pack, one hex key, minutes to build 112 pieces in the range

Small-footprint furniture

The table that slides under the sofa.

tutotak builds the pieces that fit the leftover space: C-shaped tables that tuck beneath a couch or bed, narrow nightstands for walls the bed already owns, rolling bar carts and shelving thin enough to forget. 112 of them, laid out here by shape.

Shop C-shaped tables Find my fit
112pieces
33with outlets
4.5avg rating
91,900reviews
End Table, with Charging Station, Brown Range from $18.99

Watch one go together

Six pieces, one hex key, no drilling

The whole C-table is a steel frame in four parts, a top board and a bag of bolts. This is the real build, start to finish, filmed by the brand.

What the box holds

  1. Two side rails and the C-arm, powder-coated steel tube.
  2. The top board, pre-drilled, edge-banded on all four sides.
  3. Bolts, washers and the hex key, so no tools of your own are needed.
  4. Adjustable feet, so the frame sits flat on a rug or a warped floorboard.

Full assembly and care notes ›

Browse by shape

Five shapes, one idea

Every piece here exists because a normal one would not fit. Start with the shape of the gap you are filling.

All 112 pieces ›
C-Shaped Tables
C-Shaped Tables16 pieces
 Side & End Tables
Side & End Tables37 pieces
 Nightstands
Nightstands24 pieces
 Bar Carts
Bar Carts12 pieces
 Shelves & Stands
Shelves & Stands23 pieces

Most reviewed

What people actually buy

Ranked by how many buyers have rated the listing, not by what we would like to sell.

Every piece ›

Value block · 01

Sofa gap finder

Two numbers off a tape measure decide whether a C-table works for you: how high the seat is, and how much air sits under the frame.

Measure the clearance at the lowest point. A skirt or a wide foot is what stops a base, not the frame itself. The long version lives in the fit guide.

Value block · 02

Power where you sit

33 pieces in the range carry a built-in outlet block, which is the difference between one cable to the wall and an extension lead living on the carpet.

The charging guide ›
What you plug inWhich socketRuns from a tutotak block?
Phone, earbuds, e-readerUSB-A, 5VYes, both ports at once
TabletUSB-A or the AC outlet with your own brickYes
Laptop, 45–65 WAC outlet, own chargerYes
Table lamp, up to 60 WAC outletYes
Heater, kettle, anything with a heating elementWall socketNo. Never through furniture wiring

Value block · 03

Shop by finish

The range runs warm: rustic brown board on black steel is the house look, with black, white and grey for rooms that need the furniture to disappear.

Brown 42Black 25Greige 13White 11Rustic Brown 4Gold 3Pink 3Charcoal Grey 2Brown and Black 2Green 2Pure White 1Natural 1Oak 1Pure Brown 1

Value block · 04

Which shape fits the gap

Four ways to put a surface next to a seat. They are not interchangeable, and the wrong one is the one that gets returned.

ShapeSlides under furnitureFootprintBest forIn range
C-shaped tableYes, the base doesBase as deep as the sofa is deepLaptops and plates over your lap16
End & side tableNoIts own square of floorLamps, books, a drink beside the arm37
NightstandNoNarrow, usually under 16″Bedside storage in a tight room24
Bar cartNoRolls, so it borrows floorServing, then getting out of the way12
Shelf & standNoVertical: takes wall, not floorBooks, printers, record players23

The brand

Furniture for the space that was left over

tutotak is a small-furniture brand that sells almost entirely online, and the catalogue reads like a list of awkward spots in a flat: the six inches between a bed and a wall, the arm of a sofa with nowhere to put a mug, the corner that a bookcase would swallow. Its own line is "build your cozy home", and everything in the range is scaled to that. Nothing here needs a room built around it.

The signature piece is the C-shaped table. The base slides under a sofa or a bed frame so the top can sit right over your lap, which is a solved problem in offices and a rare one in living rooms. From there the range widened into narrow nightstands, rolling carts, and shelving that leans on wall space instead of floor.

We are an independent catalogue of that range, not the manufacturer. Every buy button opens the brand's own listing, where the price and stock are the ones that count.

More about the brand and this site ›

End Table, with Charging Station, White

Production

How a piece is put together

Flat-pack steel-and-board furniture is a short manufacturing chain, and each step in it shows up later as something you either notice or do not.

Tube is cut and bent

Square steel tube, mitred and bent to the C profile. The bend radius is why a C-arm holds a laptop without flexing.

Welds, then powder coat

Joints are welded before finishing, so the coating goes on over the seam rather than being burnt through afterwards.

Board is cut and edged

Engineered wood panel, cut to size and edge-banded on all four sides. Sealed edges are what keep a spill from swelling the core.

Print and topcoat

The rustic-brown grain is a printed decor layer under a wear coat, and that coat is what resists scratches better than a stained veneer.

Drill, bag, box

Pre-drilled holes, bolts counted into a bag with the hex key, everything flat in one carton so shipping does not double the price.

You do the last step

Six bolts and a few minutes at home. The video above is an unedited run of exactly that.

The longer version, with what to check on arrival ›

End Table, with Charging Station, Black

Material quality

Two materials, honestly labelled

Nearly everything in the range is the same pair: an engineered wood panel on a powder-coated steel frame. That is not a compromise so much as the reason these shapes exist at all: a solid-timber C-arm thin enough to slide under a sofa would not hold a laptop, and a steel top would be cold and loud.

  • Panel. MDF or particle board with a printed decor surface and a wear layer. Edge-banded on four sides; the banding is the part that matters, because an unsealed edge is where water gets into the core.
  • Frame. Square steel tube, welded and powder-coated. Powder coat is baked on, so it chips rather than peels, and touches up with a furniture marker.
  • Feet. Adjustable plastic glides on most pieces. Worth setting properly, because a rocking table is nearly always one foot and not a warped top.
  • Hardware. Steel bolts into threaded inserts, not screws into bare board. That is the difference between a joint you can take apart twice and one you cannot.

What each material can and cannot take ›

Certification

What is certified, and what is not

Stated plainly, because most furniture pages in this category are vague on purpose.

Formaldehyde limits are law, not a badge

Any composite wood panel sold in the United States has to meet the TSCA Title VI emission limits (the federal rule that adopted California's CARB Phase 2). It applies to this range the same as to every other flat-pack sold here.

No third-party marks published

tutotak does not publish GREENGUARD, FSC or BIFMA certificates for these pieces, and we are not going to imply otherwise. If a certificate matters to your purchase, ask the seller on the listing before ordering.

The tip-over standard does not apply here

ASTM F2057 covers clothing storage units, meaning dressers and chests. Side tables, carts and open shelving fall outside it. That is a scope fact, not a safety endorsement: anchor anything tall in a room with children.

Load figures come from the listing

Where a weight capacity appears on this site, it is the maker's stated figure for that model. We do not test furniture, and we do not repeat a number that is not on the listing.

Value block · 05

The small-space playbook

Six placements that get used over and over, and the piece that suits each one.

Sofa arm, no side table room

A C-table parked at the arm gives a full surface without adding a footprint. Look at the 16 C-shaped tables.

Bed pushed against a wall

40 pieces in the range are listed as narrow or slim; a 12-inch nightstand still holds a lamp, a book and a glass.

Studio with one outlet

A table with its own outlet block moves the sockets to where you sit. 33 models carry one.

Guests twice a year

A bar cart is the one piece of furniture designed to be moved and then forgotten in a corner.

Two of the same, either side

25 listings ship as a matched pair, which is cheaper and easier than matching two orders.

Corner doing nothing

Corner units and record stands use wall height instead of floor. See shelves and stands.

Value block · 06

Care, loads and the things that shorten a life

Flat-pack furniture rarely breaks. It gets wobbly, swollen or scratched, and all three are avoidable.

SituationWhat actually happensWhat to do
A wet glass, left overnightWater sits at a seam and swells the panel core; the bulge does not go back downCoaster, or wipe within the hour. The finish is fine; the edge is not.
Table rocks on one cornerNearly always an unset adjustable foot, not a warped topWind the low foot down until all four load; re-check after a week on carpet.
Bolts loosen after a monthBoard compresses slightly around the inserts as it settlesOne pass with the supplied hex key at week four. Then it stays put.
Cart rolls when leaned onCasters without locks, or locks left openLock the two braked wheels; load the lower shelf heavier than the top.
Scratch on the topWear layer cut through to the printed decorFurniture marker in the closest brown; the coat is too thin to sand.
Cleaning with anything strongSolvent lifts the topcoat and dulls the printDamp cloth, mild soap, dry immediately. No ammonia, no bleach.

The team

Who works on this catalogue

Four desks rather than four headshots. This is a small independent site, and inventing staff photos would be the first dishonest thing on it.

Catalogue

Range and data

Keeps all 112 listings matched to the storefront, chases pieces that vanish and re-checks prices on a schedule.

Editorial

Descriptions and guides

Writes every word here from the listing facts and the manuals. No manufacturer copy is republished on this site.

Imaging

Photography desk

Pulls the full gallery for each piece, checks every frame by eye, and drops the ones that belong to another brand.

Support

Questions and corrections

Reads the reviews so the FAQ answers real complaints, and fixes anything on this site that turns out to be wrong.

Questions

Before you order

Will a C-shaped table fit under my sofa?

It needs clear air under the frame at the lowest point. A skirt, a wide foot or a recliner mechanism is what stops it, not the sofa itself. Around 4 to 5 inches of clearance is comfortable for most bases in this range. The fit guide walks through the measurement, and the finder above does the arithmetic.

What height should the top be?

Roughly seat height plus an inch or two. Too low and you hunch over a laptop; too high and a mug is at shoulder level. Most pieces here sit between 24 and 29 inches, and the exact number is in the specification table on every product page.

Are the outlets and USB ports safe for a laptop?

Yes for a normal 45–65 W laptop charger, a lamp or a phone. Not for anything with a heating element. Kettles, heaters and hair tools belong in a wall socket. 33 pieces in the range carry a power block; the charging guide lists what each one can run.

How long does assembly really take?

The video on this page is a single unedited run of a C-table: frame, top, bolts, done. Larger shelving units and carts have more parts but the same idea: pre-drilled holes, one hex key in the bag, no drilling of your own.

Is it real wood?

No, and the listings do not claim it is. The tops are engineered wood panel with a printed decor surface and a wear coat, on a steel frame. That is what makes a thin C-arm rigid and a narrow nightstand affordable. The materials page is blunt about what that means in use.

Can I buy from this site directly?

No. This is an independent catalogue and the checkout belongs to the seller. Every buy button opens the brand's own listing, where the price, stock and returns are handled in your account.

Why do some pieces show no price?

Because the listing had no active offer when we last checked. Those pieces stay on the site rather than disappearing, since they usually come back, and the button opens the listing so you can see the current state.

What if a piece arrives damaged?

Returns run through your order in the store account, inside the standard window. For a missing bolt rather than a broken panel, the seller answers directly on the listing page and normally ships hardware without a return.

The full question list